Fits Model X 6-seater from 2021 Plaid (new Model) with lid

The problem:

When the Model X as a 6-seater, in which the third row of seats is folded, creates a large gap between the seats of the second row, through which luggage can slip forward into the interior.
This represents a comfort and potential security risk.
Apart from that, the hole does not look very attractive.

The solution:
This luggage compartment separation is exactly what you have been missing.
Trunk Shield is a reliable protection against slipping luggage.
Trunk Shield is optically exactly aligned with the interior of the Model X.
Trunk Shield is easy to assemble and disassemble in seconds.
Trunk Shield fits under the trunk floor as well as behind the 3rd row of seats.
Trunk Shield does not need a tool. It is simply locked with stainless steel fittings from the boat in the standard lashing eyes.
Trunk Shield barely restricts the trunk volume of the Model X and gives you full freedom of movement in the middle row.
Trunk Shield is made of high quality multiplex in Germany.

Fits Model X 6-seater from 2021 Plaid (new Model)

The problem:

When the Model X as a 6-seater, in which the third row of seats is folded, creates a large gap between the seats of the second row, through which luggage can slip forward into the interior.
This represents a comfort and potential security risk.
Apart from that, the hole does not look very attractive.

The solution:
This luggage compartment separation is exactly what you have been missing.
Trunk Shield is a reliable protection against slipping luggage.
Trunk Shield is optically exactly aligned with the interior of the Model X.
Trunk Shield is easy to assemble and disassemble in seconds.
Trunk Shield weighs only 5.3kg and fits under the trunk floor as well as behind the 3rd row of seats.
Trunk Shield does not need a tool. It is simply locked with stainless steel fittings from the boat in the standard lashing eyes.
Trunk Shield barely restricts the trunk volume of the Model X and gives you full freedom of movement in the middle row.
Trunk Shield is made of high quality multiplex in Germany.

Fits Model X 6-seater until 2020 (old Model)

The problem:

When the Model X as a 6-seater, in which the third row of seats is folded, creates a large gap between the seats of the second row, through which luggage can slip forward into the interior.
This represents a comfort and potential security risk.
Apart from that, the hole does not look very attractive.

The solution:
This luggage compartment separation is exactly what you have been missing.
Trunk Shield is a reliable protection against slipping luggage.
Trunk Shield is optically exactly aligned with the interior of the Model X.
Trunk Shield is easy to assemble and disassemble in seconds.
Trunk Shield weighs only 5.3kg and fits under the trunk floor as well as behind the 3rd row of seats.
Trunk Shield does not need a tool. It is simply locked with stainless steel fittings from the boat in the standard lashing eyes.
Trunk Shield barely restricts the trunk volume of the Model X and gives you full freedom of movement in the middle row.
Trunk Shield is made of high quality multiplex in Germany.

Savings price by combination of Center Lounge and Trunk Shield.

The package includes the following products:

Center Lounge

Trunk Shield

Center Lounge

The problem:
With the Model X as a 6-seater, passengers in the third row of seats have the opportunity to comfortably stretch their legs in the middle.
For the middle individual seats missing the center armrest. In addition, there are no storage options outside the cup holder in the second row. These can not be cooled.

The solution:
This center console is exactly what you have been missing here.
Center Lounge is a comfortable armrest for the passengers in the middle row of seats.
Center Lounge has a large drinks cooler that can be cooled by the air conditioner.
Center Lounge has a storage compartment in DIN A4 format for magazines or other items.
Center Lounge gives you full freedom of movement in the third row.
Center Lounge is visually aligned with the interior of the Model X.
Center Lounge is easy to assemble and disassemble. The weight is 12.5kg.
Center Lounge is made of high quality materials in Germany.

Trunk shield

The problem:
When the Model X as a 6-seater, in which the third row of seats is folded, creates a large gap between the seats of the second row, through which luggage can slip forward into the interior.
This represents a comfort and potential security risk.
Apart from that, the hole does not look very attractive.

The solution:
This luggage compartment separation is exactly what you have been missing.
Trunk Shield is a reliable protection against slipping luggage.
Trunk Shield is optically exactly aligned with the interior of the Model X.
Trunk Shield is easy to assemble and disassemble in seconds.
Trunk Shield weighs only 5.3kg and fits under the trunk floor as well as behind the 3rd row of seats.
Trunk Shield does not need a tool. It is simply locked with stainless steel fittings from the boat in the standard lashing eyes.
Trunk Shield barely restricts the trunk volume of the Model X and gives you full freedom of movement in the middle row.
Trunk Shield is made of high quality multiplex in Germany.

Jack Pads Jack mounts for Model S 3 X and Y.

It has never been easier to lift the Tesla on the lift or with the jack.
The jack pads are simply inserted at the bottom and thanks to the O-ring can not fall down again by itself.
Thus, the Tesla can not be lifted in the wrong place and positioning the jack or the arms of the lift is much easier.
Many independent garages do not want to lift the Tesla without Jack Pads because they are afraid to damage the battery or other components.
Our Jack Pads come in a nice carrying case and belong in every Tesla trunk.

Translated with www.DeepL.com/Translator (free version)

OBD2 adapter cable for reading the battery of the Model S and X e.g. with the App ScanMyTesla.

This is the new connector which was used for the Facelift models from 09/2015 or VIN bigger than P70000.

Please check before buying, because you can never be sure when Tesla has installed the new connector.

To be able to read out the data you need an OBD2 dongle.

We recommend the OBDLink LX (green) for Android devices.

For iOS devices the OBDLink MX+ (black) is necessary.
The green adapter does not work with iOS!

The diagnostic port in the Tesla Model S and X is located under the MCU. To connect the adapter cable, the storage compartment must be removed by pressing it down firmly.

Carbon steering wheel for your Model S and X

Each steering wheel is individually made to order. The delivery time is about 4 weeks, depending on the order situation.

Individual leather colors, seam colors and 12 o'clock marking colors please ask before ordering.

Vehicles without standard steering wheel heating cannot be retrofitted because the control in the display is missing. Steering wheel heating is basically only possible in the leather part and not under the carbon parts.

We have several steering wheels in our stock, so that you can continue to use your vehicle in the processing time quite normally. We will send you your new steering wheel after completion and you have 7 days to return your old one to us.
The deposit will be returned to you within 24 hours after receipt of your old steering wheel.

Please add the following article to your shopping cart to pay the deposit of 250 Euro: Deposit for exchange steering wheel

Fits Model X 6-seater until 2020 (old Model)

The problem:
With the Model X as a 6-seater, passengers in the third row of seats have the opportunity to comfortably stretch their legs in the middle.
For the middle individual seats missing the center armrest. In addition, there are no storage options outside the cup holder in the second row. These can not be cooled.

The solution:
This center console is exactly what you have been missing here.
Center Lounge is a comfortable armrest for the passengers in the middle row of seats.
Center Lounge has a large drinks cooler that can be cooled by the air conditioner.
Center Lounge has a storage compartment in DIN A4 format for magazines or other items.
Center Lounge gives you full freedom of movement in the third row.
Center Lounge is visually aligned with the interior of the Model X.
Center Lounge is easy to assemble and disassemble. The weight is 12.5kg.
Center Lounge is made of high quality materials in Germany.

For Model S and X with premium seats (adjustable headrest):
NOT suitable for the new generation of seats from the end of 2019!
If you have a new Model S or Model X click here.

Smartphone or tablet holder for the second row WITHOUT headphones

The ideal complement for your Model S or Model X with premium seats. The headband is simply hooked into the back of the seat and features a ball mount that installs a smartphone and tablet holder on delivery.
Inclination and angle of rotation can be adjusted and locked as desired.

The contact surfaces to the back of the seats are covered with sponge rubber, so that no damage to the rear seats can take place.

A must for all kids in the second row!

Ball seat: 17mm
Holder infinitely adjustable between 11,3cm and 21cm
This is a 3D print.

NOTE:
The 3D printing material is only partially heat resistant.
In hot outdoor temperatures and direct sunlight, the material may deform.
Please do not leave any weight on the stirrup or remove the stirrup if the vehicle is parked longer.
Deformations due to heat can not be accepted as a complaint.

High-quality dongle with the outside in black leather and the inside in soft Alcantara in either grey, tan (beige) or burgundy red for your Model S, Model X and Roadster.

Thanks to the integrated magnets the folder is easy to open and close.