Jack Pads Jack mounts for Model S 3 X and Y.

It has never been easier to lift the Tesla on the lift or with the jack.
The jack pads are simply inserted at the bottom and thanks to the O-ring can not fall down again by itself.
Thus, the Tesla can not be lifted in the wrong place and positioning the jack or the arms of the lift is much easier.
Many independent garages do not want to lift the Tesla without Jack Pads because they are afraid to damage the battery or other components.
Our Jack Pads come in a nice carrying case and belong in every Tesla trunk.

Translated with www.DeepL.com/Translator (free version)

OBD2 adapter cable for reading the battery of the Model S e.g. with the App ScanMyTesla.

This is the old connector which was used for the Prefacelift models up to 09/2015 or VIN smaller than P70000.

Please check before buying, because you can never be sure when Tesla has installed the new connector.

To be able to read out the data you need an OBD2 dongle.

We recommend the OBDLink LX (green) for Android devices.

For iOS devices the OBDLink MX+ (black) is necessary.
The green adapter does not work with iOS!

The diagnostic port in the Tesla Model S and X is located under the MCU. To connect the adapter cable, the storage compartment must be removed by pressing it down firmly.

OBD2 adapter cable for reading the battery of the Model S and X e.g. with the App ScanMyTesla.

This is the new connector which was used for the Facelift models from 09/2015 or VIN bigger than P70000.

Please check before buying, because you can never be sure when Tesla has installed the new connector.

To be able to read out the data you need an OBD2 dongle.

We recommend the OBDLink LX (green) for Android devices.

For iOS devices the OBDLink MX+ (black) is necessary.
The green adapter does not work with iOS!

The diagnostic port in the Tesla Model S and X is located under the MCU. To connect the adapter cable, the storage compartment must be removed by pressing it down firmly.

The center console fits perfectly without mounting into the vehicle compartment a. The small shelf under the monitor needs to be removed (easy removal of spring clips).

At the front of the console you will find a shelf for storing drink bottles. The shelf has two seperators allowing for a maximum of 3 bottles to be securely stored.

The middle part serves as a multi purpose storage tray. The optional cup holder or the ashtray can also be fitted here.

In the area under the hinged lid you can make optimal use of the space provided by inserting different storage modules.

In the normal console maximum of two inserts can be used.

In the bottom area is still nevertheless offers plenty of space for various things that you really do not need but it needs to have.

In the variant "deepened", the flap is set lower by 30mm, so that for example the smartphone -. If it is because on the cover - can not laterally fall into the footwell. In this version you can only use for use below (with subdivision or large cup).

In the rear area of ​​the plug-in connections of Tesla remain freely accessible and it can be also used as storage space for cables, etc. charge.

In the variant QI loaders in the flap located at the end of a 20 cm long USB cable that can be plugged directly into the USB outlet.

Trunk Screen for your Model S. Nicely designed and of high usability. Installation in only 5 minutes.

The fixing ledgers left and right are being tightly attached to the trunk's side panels by strong magnets. The screen can be easily removed and reinserted in only one action when the rear set back rest is folded down.

The ledgers provide optional mounting of auxiliary trunk lamps. The lamps come with on/off switch and movement detector. You can also remove the lamps easily and use them as flash lights. Please order the lamps as an option with the screen in our shop.

The ledgers can be removed and reattached any time.

The screen and the ledgers can be removed from the car without leaving any traces.

The closed screen reduces driving noises inside the car. You can also store light objects on the screen.

The scrren's handle bar is adapted to the curved design of the trunk lid making sure noone can look into the trunk once the screen is closed.

The screen has two positions: fully opened and fully closed.

Carbon steering wheel for your Model S and X

Each steering wheel is individually made to order. The delivery time is about 4 weeks, depending on the order situation.

Individual leather colors, seam colors and 12 o'clock marking colors please ask before ordering.

Vehicles without standard steering wheel heating cannot be retrofitted because the control in the display is missing. Steering wheel heating is basically only possible in the leather part and not under the carbon parts.

We have several steering wheels in our stock, so that you can continue to use your vehicle in the processing time quite normally. We will send you your new steering wheel after completion and you have 7 days to return your old one to us.
The deposit will be returned to you within 24 hours after receipt of your old steering wheel.

Please add the following article to your shopping cart to pay the deposit of 250 Euro: Deposit for exchange steering wheel